Pipe prices · July 2026
GP pipe price in Bangladesh.
Pre-galvanised (GP) round and box pipe at the mill's published rate of ৳117 per kg (27 June 2026). The chart below converts that into approximate per-piece prices for the most common sizes.
Mill rate — ৳117 / kg
GP round pipe price chart (20 ft piece)
Prices below are computed from the published per-kg rate and the standard weight formula — use them for estimating; the shop shows the exact live rate and the mill confirms every order. GP box sections are priced the same way at the same per-kg rate.
| Size (OD) | Inch | Wall | Weight / pc | Approx. price / pc |
|---|---|---|---|---|
| OD 19 mm | ≈ ¾″ | 1.00 mm | ≈ 2.7 kg | ≈ ৳316 |
| OD 25 mm | ≈ 1″ | 1.00 mm | ≈ 3.6 kg | ≈ ৳421 |
| OD 25 mm | ≈ 1″ | 1.50 mm | ≈ 5.3 kg | ≈ ৳620 |
| OD 32 mm | ≈ 1¼″ | 1.50 mm | ≈ 6.9 kg | ≈ ৳807 |
| OD 38 mm | ≈ 1½″ | 1.50 mm | ≈ 8.2 kg | ≈ ৳959 |
| OD 50 mm | ≈ 2″ | 1.50 mm | ≈ 10.9 kg | ≈ ৳1,275 |
| OD 50 mm | ≈ 2″ | 2.00 mm | ≈ 14.4 kg | ≈ ৳1,685 |
| OD 75 mm | ≈ 3″ | 2.00 mm | ≈ 21.9 kg | ≈ ৳2,562 |
| OD 100 mm | ≈ 4″ | 2.00 mm | ≈ 29.5 kg | ≈ ৳3,452 |
Mill reference rates published 27 June 2026. Steel prices move with the raw-material market — the online shop always shows today's live rate, and the mill confirms the final price on every order before any payment. Page updated 2 July 2026.
Where GP fits
The furniture & fabrication favourite
GP pipe is rolled from coil that was galvanised before forming, so it arrives with an even, bright zinc skin that takes chrome-look polishing and powder coating well — the reason furniture makers, grille fabricators and shopfitters default to it. It bends and welds like MS (touch up weld zones, since the heat burns off local zinc), holds its finish for years indoors, and costs meaningfully less than hot-dip GI. For permanently wet or buried service, step up to GI pipe — for everything under a roof, GP is usually the smart money.
Common questions
GP pipe price FAQ
What is the GP pipe price in Bangladesh today?
Gram Bangla Tubes' published mill rate for GP (pre-galvanised) pipe is ৳117 per kg (round and box, published 27 June 2026). A piece price is the pipe's weight × the rate — for example OD 25 mm × 1.00 mm weighs about 3.6 kg per 20 ft piece, roughly ৳421.
What is the 1 inch GP pipe price in Bangladesh?
1 inch GP pipe (OD 25 mm) at the published ৳117/kg rate: about ৳421 per 20 ft piece in 1.00 mm wall (≈ 3.6 kg), or about ৳620 in 1.50 mm wall (≈ 5.3 kg). The shop shows today's exact rate.
What is GP pipe used for?
GP (galvanised-pregalvanised) pipe is rolled from zinc-coated coil, giving a clean silver finish and good rust resistance at a lower cost than hot-dip GI. It's the go-to for furniture, grilles, gates, indoor frames, display structures and light outdoor work.
GP vs GI pipe — which should I buy?
Pick GP for indoor and light-duty work where budget and finish matter; pick GI (hot-dip galvanised) for water lines, buried or permanently wet service where the thicker zinc coat earns its premium. Both are made in-house at our Narayanganj mill.
What GP pipe sizes does Gram Bangla Tubes make?
Round and box GP pipe from 12 mm to 165 mm, wall thickness 0.60 mm to 2.30 mm, in 20 ft lengths — all at the published per-kg mill rate on the online shop, or call +88 01907 084 261 for bulk pricing.
More price guides: MS pipe · GI pipe · SS pipe · all steel pipe prices
Order GP pipe at today's mill rate.
Pre-galvanised round & box pipe, factory-direct from Sonargaon, Narayanganj — configure size and wall online.